Pulley blocks
ISOTOOLS Pulleys Blocks with the international CE marking in the highest quality for fast lifting, drawing and tensioning.
The CE Hoists are available in various designs with iron rollers, brass rollers and plastic rollers. Broken load control by the VPA Remscheid Institute. A high degree of stability and high-quality materials guarantee these pulleys in various designs.
Here you will find a wide selection for every need.
Constant expansion and optimization of our product range "Made in Germany".
Permanent improvement and control of the strict guidelines and test regulations for each individual tool according to the latest standard. Our flexibility and competence leaves room for the realization of customer-specific special solutions.
In addition to the delivery of tools for telegraph construction, our employees not only provide advice before purchasing, but as a long-term partner, we provide fast, qualified support and service.
Made in Germany
- forged
- for quick lifting, pulling, tensioning
- galvanized, compact sheet steel housing with 3 adjacently lying rollers
- Two-piece: Each pulley consists of two pulley piston, one with cable eye
- Lightweight plastic rollers, long lasting brass rollers or universal iron rollers
- individual ropes: ropes can be ordered separately as follows:
Enclosed, knotted or spliced - Ropes, 20 m long (please order separately):
Hemp Ropes DIN EN 699 Form A (Art.No.1133 to 1171) these have the highest strength under the natural fiber and have loads with a 500 times its own weight
Polypropylene Ropes DIN EN 699 Form A (Art.No. 1125 to 1170) these are suitable for outdoor use and are particularly resistant against acids and alkalis - Other rope length are available upon request
- Please note when ordering that the specified rope diameter for pulley block and
rope is the same.
On request we will take over the assembly and splicing of the ropes for you.
The Tools are certified by TÜV according to ISO 9001: 2008.
All Pulley Blocks are stamped with the CE-symbol, as well as with:
- breaking load / WLL p.pc. manufacturing year
- Universal application for Car repairs, travelling
- Hobby: Boating, Caravanning
- Garden: agriculture and forestry
- Workshop: factory and assembly work
Attention:
- always check the universal hoist for correct operation before use
- keep out from under suspended loads - wear gloves to avoid hand injuries
- at rope wear only use original rope
Quality assurance measures:
- According procedure the professional association the breaking load at all
- universal pulleys least 4x higher than the nominal load.
- The hoists have been tested by TÜV Rheinland in Cologne.
- Every year, the breaking load is controlled by the VPA, Remscheid!
- When use hoist never exceed Working Load Limit WWL!
| Roll-Ø mm | 40 | 50 | 60 | 70 | 80 | 100 | |
|---|---|---|---|---|---|---|---|
| 3 Iron-Rolls | Art.No. | 1059 | 1058 | 1057 | 1056 | 1055 | 1054 |
| weight | g | 850 | 1.500 | 1.600 | 3.700 | 4.000 | 8.600 |
| Hook opening | mm | 15 | 15 | 15 | 21 | 21 | 25 |
| Width of Roll | mm | 9 | 12 | 12 | 16 | 16 | 20 |
| for Rope-Ø | mm | 6 | 8 | 10 | 12 | 12 | 16 |
| Breaking Load | approx. kg | 600 | 800 | 1.000 | 1.200 | 1.400 | 2.000 |
| WLL | Kg | 150 | 200 | 250 | 300 | 350 | 500 |
| Construction Heigh min. | mm | 360 | 390 | 390 | 590 | 590 | 790 |
| Roll-Ø mm | 40 | 50 | 60 | 70 | 80 | 100 | |
|---|---|---|---|---|---|---|---|
| 3 Brass-Rolls | Art.No. | 1066 | 1065 | 1064 | 1063 | 1062 | 1061 |
| Weight | g | 0.900 | 1.550 | 1.650 | 3.800 | 4.100 | 8.600 |
| Hook Opening | mm | 15 | 15 | 15 | 21 | 21 | 25 |
| Width of Roll | mm | 9 | 12 | 12 | 16 | 16 | 20 |
| for Rope-Ø | mm | 6 | 8 | 10 | 12 | 12 | 16 |
| Breaking Load | approx. kg | 600 | 800 | 1.000 | 1.200 | 1.400 | 2.000 |
| WLL | Kg | 150 | 200 | 250 | 300 | 350 | 500 |
| Construction heigh min. | mm | 360 | 390 | 390 | 590 | 590 | 790 |
| Roll-Ø mm | 40 | 60 | |
|---|---|---|---|
| 3 Synthetic-Rolls | Art.No. | 1073 | 1071 |
| weight | g | 0.740 | 1.200 |
| Hook Opening | mm | 15 | 15 |
| Width of Roll | mm | 9 | 12 |
| for Rope-Ø | mm | 6 | 10 |
| Breaking Load | approx. Kg | 600 | 1.000 |
| WLL | Kg | 150 | 250 |
| Construction heigh min. | mm | 360 | 390 |
| Hemp-Rope Ø mm | 6 | 8 | 10 | 12 | 16 | |
|---|---|---|---|---|---|---|
| Art.No. | 1126 | 1133 | 1140 | 1157 | 1171 | |
| Breaking Load | kg | 300 | 500 | 800 | 1.200 | 2.000 |
| weight | g | 0.600 | 1.000 | 1.600 | 2.200 | 4.000 |
| Polypropylenrope Ø mm | 6 | 8 | 10 | 12 | 16 | |
|---|---|---|---|---|---|---|
| Art.No. | 1125 | 1132 | 1149 | 1156 | 1170 | |
| Breaking Load | kg | 550 | 1.425 | 1.650 | 2.030 | 3.500 |
| weight | g | 0.400 | 0.600 | 0.900 | 1.300 | 2.300 |
Made in Germany
- Hemp ropes DIN EN 699 Form A
- These have the highest strength under the natural fiber and have loads with a 500 times its own weight
- Standard: 20 m long for a lifting height of approx. 2.5 m
- Individual lifting heights: 16-fold woven multifilament yarn rope without twist for heights up to 17 m
- high strength
- Advantages due to good grip
- Other lengths available on request
- Polypropylene thread DIN EN 699 Form A
- These are suitable for outdoor use and are particularly resistant against acids and alkalis
- Standard: 20 m long for a lifting height of approx. 2.5 m
- Individual lifting heights: 16-fold woven multifilament yarn rope without twist for heights up to 17 m
- high strength
- Advantages due to good grip
- Other lengths available on request
| Hemp-Rope Ø mm | 6 | 8 | 10 | 12 | 16 | |
|---|---|---|---|---|---|---|
| Art.No. | 1126 | 1133 | 1140 | 1157 | 1171 | |
| Breaking Load | kg | 300 | 500 | 800 | 1.200 | 2.000 |
| weight | g | 0.600 | 1.000 | 1.600 | 2.200 | 4.000 |
| Other lenghts on request | ||||||
| Polypropylenrope Ø mm | 6 | 8 | 10 | 12 | 16 | |
|---|---|---|---|---|---|---|
| Art.No. | 1125 | 1132 | 1149 | 1156 | 1170 | |
| Breaking Load | kg | 550 | 0.960 | 1.425 | 2.030 | 3.500 |
| weight | g | 0.400 | 0.600 | 0.900 | 1.300 | 2.300 |
| Other lenghts on request | ||||||
„Made in Germany“
- Manufactured from high-quality steel with safety hook
- Self-lubricating rollers quality polyamide
- Polypropylene rope 18 m long DIN EN 699 Form A
- Polypropylene rope 22 m long DIN EN 699 Form A
- for quick lifting, pulling and tensioning
- Breaking load control by Institute VPA
- individual lifting height: on request can be a 16-fold woven Multifilament yarn rope without twist for lifting heights up to 7 m
The Tools are certified by TÜV according to ISO 9001: 2008.
All Hoists are stamped with the CE-symbol, as well as with:
- Breaking load / WLL p.pc. manufacturing year
- Universal application for Car repairs, travelling
- Hobby: Boating, Caravanning
- Garden: agriculture and forestry
- Workshop: factory and assembly work
Attention:
- always check the universal hoist for correct operation before use.
- keep out from under suspended loads - wear gloves to avoid hand injuries
- at rope wear only use original rope
Quality assurance measures:
- According procedure the professional association the breaking load at all
- universal pulleys least 4x higher than the nominal load.
- The hoists have been tested by TÜV Rheinland in Cologne.
- Every year, the breaking load is controlled by the VPA, Remscheid!
- When use hoist never exceed Working Load Limit WWL!
| Article | |||
|---|---|---|---|
| Art. No. | 4007 | 4052 | |
| Height of lift | m | 2,5 | 2,5 |
| Gear | - | 6:1 | 8:1 |
| Breaking load | approx. kg | 800 | 1.000 |
| WWL | kg | 220 | 300 |
| Weight | approx. kg | 0,75 | 0,95 |
| Overall Height | mm | 300 | 300 |
| Rope length | m | 18 | 22 |
>
„Made in Germany“
- Manufactured from high-quality steel with safety hook
- Self-lubricating rollers quality polyamide
- Polypropylene rope 18 m long DIN EN 699 Form A
- Polypropylene rope 22 m long DIN EN 699 Form A
- proven rope brake with 5 teeth which clamp the rope parallel
- for quick lifting, pulling and tensioning
The Tools are certified by TÜV according to ISO 9001: 2008.
All Hoists are stamped with the CE-symbol, as well as with: breaking load / WLL p.pc. manufacturing year
- Universal application for Car repairs, travelling
- Hobby: Boating, Caravanning
- Garden: agriculture and forestry
- Workshop: factory and assembly work
Quality assurance measures:
- According procedure the professional association the breaking load at all
- universal pulleys least 4x higher than the nominal load.
- The hoists have been tested by TÜV Rheinland in Cologne.
- Every year, the breaking load is controlled by the VPA, Remscheid!
- When use hoist never exceed Working Load Limit WWL!
| Article | |||
|---|---|---|---|
| Art. No. | 4014 | 4069 | |
| Height of lift | m | 2,5 | 2,5 |
| Gear | - | 6:1 | 8:1 |
| Breaking Load | approx. kg | 800 | 1.000 |
| WWL | kg | 220 | 300 |
| weight | approx. kg | 0,80 | 1,00 |
| Overall Height | mm | 300 | 300 |
| Rope length | m | 18 | 22 |