Safety tools, e-mobility, energy storage
"Made in Germany"
- Rubberized side pressure switch
- On-off momentary light
- easy to operate even with gloves on
- non-conductive
- waterproof up to 3 m
- as well as dustproof
- extremely bright xenon bulb in pre-focused reflector
- 38 lumen luminosity
- explosion protection zone 1: II 2G Ex eib IIC T4 / II 2D Ex ibD 21 T98°C
- robust neon yellow ABS housing
- pressure compensation valve
- corrosion resistant
The best-selling ex-proof helmet lamp in the fire and rescue service. The proven and reliable product from the USA convinces by high quality and enormous luminosity at low weight.
The UK 4AA lamp is recommended as a helmet lamp for hands-free use by leading helmet manufacturers as an official accessory and is successfully used by fire departments, industry, trade, police and military.
Helmet mounts available for all common firefighting and industrial safety helmets. Tried and tested tens of thousands of times worldwide for many years. The standard type with excellent gas Ex-protection and dust Ex-protection. We supply the lamp with brand alkaline batteries.
Size / mm | Weight / g | Norm |
---|---|---|
160 x 45 x 35 | 156 | EC Type E |
- Single filter full face mask made of a resistant
- EPDM mask body with double sealing frame and triple sealing
- sealing line for comfortable and tight fit
- viewing window made of Plexiglas (PMMA)
- with plastic tensioning frame
- 5-point banding
- standard round thread connection Rd40
- special safety for breathing and eyes
- universal size: almost perfect fit for
- all face sizes
- easy stock and spare parts management
Size | Weight/ g |
---|---|
1 | 500 |
- Filter for all half and full face masks available on the market with a breathing connection according to EN 148-1.
ADVANTAGES:
- Aluminum housing for extra safety
- good visibility of possible filter damage
- Individually packed and resealable
- for optimal protection and longer use
- Please always order 2 filters per mask
Size | Weight/ g |
---|---|
1 | 100 |
- Lightweight, robust protection against a range of inorganic chemicals and biohazards.
- Good protective barrier against numerous inorganic liquid chemicals, including acids and alkalis.
- Coverall (type 3), lightweight yet relatively rugged and durable
- Designed for protection. Typical coverall performance features, such as a hood optimized for respirators and zipper flap with a self-adhesive tape fastener
- High visibility thanks to a bright yellow signal color for increased occupational safety
- Antistatic, tested according to EN 1149-5
- Polyethylene made of two-component polypropylene/polyethylene fleece
- PCE CATEGORY III (Type 3-B, Type 4-B, Type 5-B, EN 1073-2, EN 14126, EN 1149-5)
Size | Weight/ g | Norm |
---|---|---|
XL | 300 | EN 1149-5 |
- at least 15 minutes protection from harmful fire gases, smoke and particles
- quick to put on: as soon as the the packaging is opened, the filter plug is automatically from the filter and the bonnet can be put on immediately
- Easy handling thanks to integrated head strap
- three different packages:
Hard Case (protection against splashing water IP54)
Soft Pack (protection against dust IP5)
Single Pack (cardboard box) - additional protection against H2S (test procedure according to DIN 58647-7)
- various carrying options: on the belt, by shoulder strap, alligator clip or belt clip
- Long service life: if the filter is replaced after 8 years, the service life increases to a total of 16 years
Norm/Test procedure | weight / g |
---|---|
DIN 58647-1 | 500 |
- Robust belt made of polypropylene
- completely without metal with stable clamp buckle
- high wearing comfort and durable fabric
- stable plastic buckle
- length individually adjustable
- width: 4 cm
- color:black
- Other lengths available if needed.
Size/cm | Weight/ g |
---|---|
120 | 75 |
130 | 80 |
Schutz für Schweißen zertifiziert nach EN ISO 11611 Klasse I / A1 + A2
- Protection against heat and flame certified according to EN ISO 11612 A1 + A2/B1/ C1/ E2/ F1
- Electrostatic discharge certified according to EN 1149-5, 1149-3
- Protection against chemicals certified according to EN 13034 Type 6
- Protection against electric arc certified according to IEC 61482-2 in conjunction with IEC 61482-1-2 Class I
- High-visibility warning clothing certified according to EN ISO 20471 Class 2
- breathable material
- inherently flame retardant as well as self-extinguishing
- contrasting colors and reflective stripes
- highly breathable
- high durability and color fastness
- all pockets interlocked
- material: twill, 55% modacrylic, 43% cotton, 2% other fibers, approx. 330 g/sqm, FC
- matching pants to this article → Art.No. 2012
Size | Weight/ g | Norm |
---|---|---|
44,46,48, 50, 52, 54 | 800 | ![]() |
56, 58 | 800 | ![]() |
60, 62, 64, 66 | 850 | ![]() |
- Protection for welding certified according to EN ISO 11611 Class I / A1 + A2
- Protection against heat and flame certified according to EN ISO 11612 A1 + A2/B1/ C1/ E2/ F1
- Electrostatic discharge certified according to EN 1149-5, 1149-3
- Protection against chemicals certified according to EN 13034 Type 6
- Protection against electric arc certified according to IEC 61482-2 in conjunction with IEC 61482-1-2 Class I
- High-visibility warning clothing certified according to EN ISO 20471 Class 2
- breathable material
- inherently flame retardant as well as self-extinguishing
- contrasting colors and reflective stripes
- highly breathable
- high durability and color fastness
- all pockets interlocked
- material: twill, 55% modacrylic, 43% cotton, 2% other fibers, approx. 330 g/sqm, FC
- matching jacket to this article → Art.No. 2011
Size | Weight/ g | Norm |
---|---|---|
44,46,48, 50, 52, 54 | 800 | ![]() |
56, 58 | 800 | ![]() |
60, 62, 64, 66 | 850 | ![]() |
- functional, fashionable parka
- inherently flame retardant, high flame protection and self-extinguishing, suitable for welding work, electrostatic dissipative, water, oil and dirt repellent, protection against rain due to waterproof, windproof and breathable membrane, skin-friendly (Oeko-Tex Standard 100 product class II)
- Warning, weather, flame and heat protection parka with detachable hood and optional inner jacket
- stand-up collar with zipper to close high
- Napoleon pocket under the double visor with rain drainage channel
- hems and hood adjustable in width
- Chest pockets and side pockets all covered according to standards and with zippers
- Reflective stripes on sleeves, collar, shoulder and torso ensure very good night visibility, two-tone color scheme and distinctive topstitching round off the design of the outer jacket
the design of the outer jacket - color: luminous yellow-navy
- with weather protection membrane (lining laminate) shrink-proof, because sanforized
- highly tear-resistant due to the use of quality yarns and optimal fabric construction
- skin-friendly and very breathable
- very high colorfastness, made-up according to EN 340, all pockets interlocked
- all main and closing seams as 3-fold cut seam or safety seam
- fabric 58 twill
- best wearing physiological properties skin-friendly by Oeko-Tex Standard 100 product class II (products with skin contact)
- outer fabric bright yellow: 55% modacryl / 43% cotton / 2% carbon, approx. 330 g/sqm
- outer fabric blue: 78% cotton / 20% polyester / 2% carbon, approx. 330 g/sqm
- inner lining: 55% modacrylic / 45% cotton
Device for zip-in inner jacket → Art.No. 2017
Size | Weight/g | Norm |
---|---|---|
44/46-64/66 | 2.000 | EN ISO 11612,EN 61482-1-2, EN ISO 11611,EN 13034,EN 1149-5, EN ISO 20471, EN343,EN 14058 EN ISO 13688 |
- Protective clothing made of Nomex® Comfort is the protective option when things get hot.
- It offers flame and heat protection and protection against electric arcs
- It is characterized by electrostatic discharge capability and optionally by light chemical protection (type 6)
- The warming inner jacket made of fleece has a slim silhouette and can be zipped in and out.
- Especially practical are the inside pockets, in which e.g. cell phone, folding ruler and/or wallet find place
- color: black
- Protective clothing made of Nomex® Comfort is the protective variant when the heat is on
- Nomex® fabrics offer highest flame and heat protection even in low weight classes, are soft and therefore comfortable to wear
- Fabrics made of Nomex Comfort® are extremely robust, tear-resistant and hard-wearing.
- They have very good wash resistance, so that they have 2 to 3 times the service life of flame-retardant cotton and cotton blend fabrics.
- These high quality products are subject to consistent quality and final inspection
- Material: 36% Polyester flame retardant, 33% Modacryl, 27% Cotton,4% carbon, approx. 350 gr./m²
Can be worn separately or in combination → Art.No. 2015
Gr. | Gew./g | Norm |
---|---|---|
44/46;48/50;52/54 | 700 | IEC 61482-2:2009 Kl. 1, EN 1149-3-5,EN 471,EN ISO 11612 A1-B2-C2,EN 14058 |
56/58 | 700 | IEC 61482-2:2009 Kl. 1, EN 1149-3-5,EN 471,EN ISO 11612 A1-B2-C2,EN 14058 |
60/62, 64/66 | 700 | IEC 61482-2:2009 Kl. 1, EN 1149-3-5,EN 471,EN ISO 11612 A1-B2-C2,EN 14058 |
- according to IEC 61112 class 0
- Category A+Z
- thickness 1 mm
- UV-stabilized
- especially suitable for outdoor use
- highly flexible and largely tear and puncture resistant
- temperature resistant: -50 °C and + 100 °C
- VDE tested and with VDE symbol
- Suitable for working on live parts up to 1,000 volts.
Of course stamped with the appropriate signs of the standard:
VDE / GS mark, double triangle, IEC standard, 1000V, Made in Germany, manufacturer and year of manufacture.
Abm. / mm | Gewicht / g | Norm |
---|---|---|
130 x 130 | 40 | ![]() |
250 x 350 | 210 | ![]() |
500 x 500 | 334 | ![]() |
600 x 600 | 400 | ![]() |
1.000 x 1.000 | 1.200 | ![]() |
1.200 x 1.200 | 1.700 | ![]() |
- according to IEC 61112 class 0
- Category A+Z
- thickness 1,6 mm
- UV-stabilized
- especially suitable for outdoor use
- highly flexible and largely tear and puncture resistant
- VDE tested and with VDE symbol
- Suitable for working on live parts up to 1,000 volts.
- Of course, stamped with the appropriate signs of the standard: VDE / GS mark, the VDE standard, 1000V, Made in Germany, manufacturer and year of manufacture.
mm | Weight/g | Norm |
---|---|---|
130 x 130 | 45 | ![]() |
250 x 350 | 220 | ![]() |
500 x 500 | 440 | ![]() |
600 x 600 | 720 | ![]() |
1.000 x 1.000 | 1.900 | ![]() |
1.200 x 1.200 | 3.100 | ![]() |
- IEC 61111:2009 Class 2
- working voltage:17.000 V, test voltage:20.000 V, resistance:30.000 V
- DIN EN 60243-1 VDE 0303-21
- According to the accident prevention regulations (PSA) of the professional associations
- Thickness: 3 mm
- Color: gray
- Quality: NR/SBR, grooved on one side, fabric patterned on underside
- Hardness ± 70 Shore A ± 5 (DIN 53505)
- Tensile strength >= 5 Mpa (DIN 53504)
- Elongation at break >= 250 % (DIN 53504)
- Temperature range -25 C to +70 C
- Bag for insulating stand mat → Art.No.608
Suitable for working on live parts up to 1,000 volts.
Stamped, of course, with the relevant signs of the standard:
Double triangle, DIN-EN-VDE standard, class, working voltage, test voltage, resistance.
mm | Weight / g | Norm |
---|---|---|
1.000 x 1.000 | 3.975 | ![]() |
- DIN EN 60903:2003, IEC 60900:2014, Category RC, Class 0, Cat. III
- Material: natural latex
- Test voltage: 5.000 V (A.C)
- Usage highest voltage: 1.000 V (A.C)-1.500 (D.C)
- Arc protected and against acid, oil and ozone
- Design: long cuff, straight edge
- length: 410 mm
- very good flexibility
- very good tactile sensitivity
- good grip
- the ergonomic design increases comfort
- the glove is soft and easy to put on and take off
- straight edge
- for storing the gloves we recommend our padded protective bag → art.no.612
- it is recommended to use undergloves for absorption of skin moisture and better ventilation → Art.No.620
Class | Size | Weight / g | Norm |
---|---|---|---|
0 | 9 | 215 | ![]() |
0 | 10 | 215 | ![]() |
0 | 11 | 215 | ![]() |
- DIN EN 60903, EN60903, IEC60903, IEC61482-1-1, IEC61482-1-2, CE
- Category: III
- Test voltage: 5,000 V (A.C), use highest voltage: 1,000 V (A.C)-1,500 (D.C)
- arc fault resistance according to IEC 61482-1-1 (open arc) and IEC 61482-1-2 (box test)
- with additional protection against mechanical hazards
- Design: long cuff, straight edge
- Material: natural latex
- length: 360 mm
- thickness: 2,3 mm
- very good flexibility
- very good tactile sensitivity
- good grip
- ergonomic design increases comfort
- the glove is soft and easy to put on and take off
- straight edge
- for storing the gloves we recommend our padded protective bag → Art.No.612
- It is recommended to use under-gloves for absorption of skin moisture and better ventilation → Art.No.620
Fields of application:
- Generation, transportation, transformation and distribution of electricity,
- Rail transport,
- Telecommunications,
- Construction,
- Installation and maintenance of photovoltaic systems,
- hybrid car batteries, etc.
Class | Size | Weight / g | Norm |
---|---|---|---|
0 | 9 | 400 | ![]() |
0 | 10 | 400 | ![]() |
0 | 11 | 400 | ![]() |
- made of high quality black imitation leather
- inside padded with belt loop and snap hook
- for safe storage of electrician gloves → Art.No. 610, 611 and 613
Size / mm | Weight/ g |
---|---|
200 x 180 x 70 | 200 |
- to protect the electricians protective gloves
- to absorb the hand moisture and to allow better ventilation
- made of fine white cotton jersey
- One size fits all
Weight/ g |
---|
50 |
- Ultra-light arc fault protection gloves made of Nomex® and Kevlar® fabric
- It can be worn alone or is outstanding suitable as undergloves for insulating gloves.
- In the event of an arc fault, the protective glove prevents the latex gloves from melting into the surface of the hand
- Arc fault test based on IEC 61482-1-2, Class 1, Test level W(LBP)=168 kJ
- Arc fault test based on IEC 61482-1-1, ATPV 8.7 cal/cm²
- Protection against thermal hazards according to EN 407:2004
- Protection against mechanical risks according to EN 388:2003
- good feel and sensitivity even when worn under insulating protective gloves, sweating is reduced
- Perfect fit thanks to soft, supple knitted fabric
- Inseams, with aramid thread
- Attention! The gloves have no insulating properties when combined with insulating gloves, however the perfect protection against body currents and the thermal dangers of the accidental arc is realized.
size | Weight / g | Norm |
---|---|---|
9/10 | 400 | EN ISO 214020:2020; EN 407:2020 IEC 61482-1-1:09 |
- Certification: EN 388, EN 407
- Protection against contact heat (100° C, 15 seconds)
- Full cowhide leather gloves, gray (color code: 1200)
- with elastic on the back of the hand, winged thumb, large cut
size | Weight / g | Norm |
---|---|---|
10 | 500 | EN 388, EN 407 |
- certified according to EN 388:2016 (4 1 0 1 X) and EN ISO 374-1:2016/Type A (A J K L O T)
- excellent mechanical abrasion resistance
- good grip in damp and wet areas due to
- the grip structure in the palm
- good resistance to many oils, greases, acids and alkalis
Size | Weight/ g | Norm |
---|---|---|
9 | 100 | EN 388:2016, EN 374-1:2016 |
10 | 100 | EN 388:2016, EN 374-1:2016 |
11 | 100 | EN 388:2016, EN 374-1:2016 |
- VDE Made in Germany
- with inserted steel spring, not touchable from the outside
- for fastening rubber cover cloths
- manufactured according to the latest standard VDE / EN 60900:2012 / IEC 60900:2012
- Tools with double triangle are tested with a test voltage of 10,000 volts, certified and are suitable for working on live parts up to 1,000 volts.
All safety tools are stamped with the appropriate marks of the standard: IEC 60900:2012 / EN 60900:2012 or with VDE/GS as well as with item number, dimension, Year of manufacture, manufacturer, 1000V and double triangle or VDE mark. The high-quality plastic is compliant with the REACH regulation and withstands the latest PAH test.
mm | Weight /g | Norm |
---|---|---|
160 | 70 | ![]() |
- to insulate cable ends and single wires
- from tough-insulating material
- with cross-cut cover
- According to the latest Norm EN 60900:2012 / IEC 60900:2012
Made of high quality insulating plastic for the latest Standard Norm EN 60900:2012 / IEC 60900:2012.
All Caps are stamped and signed according their Norm:
- IEC / EN 60900: 2012 with Item Number, Size, Manufacturing Year and Manufacturer, 1000V and Double Triangle respectively VDE-Sign.
- The high-quality plastic is compliant with the REACH Regulation and withstands the newest PAK-Test.
Ø x length / mm | weight / g | Norm |
---|---|---|
10 x 40 | 10 | ![]() |
10 x 75 | 10 | ![]() |
10 x 100 | 15 | ![]() |
15 x 100 | 15 | ![]() |
20 x 100 | 20 | ![]() |
25 x 110 | 30 | ![]() |
30 x 120 | 40 | ![]() |
40 x 135 | 55 | ![]() |
50 x 155 | 95 | ![]() |
60 x 140 | 105 | ![]() |
1 Set-30 pcs. ( 3 pcs. each Size) | 1.185 | ![]() |
Made in Germany
- DIN/EN 50365 CE 0340
- Safety helmet according to EN 50365 (0682 part 321):2002-11 (double triangle)
- also complies with EN 397
- electrical insulation (1,000 V AC)
- made of polyethylene, without ventilation openings
- universal shape with helmet shell pulled down in the neck
- rain gutter
- side slots for hearing protectors
- strongly angled neckband for perfect fit
- chinstrap holder
- size adjustment from 51-64 cm
- additional test: low temperatures up to -20
- Service life: up to 5 years
Accessories
- Electrician face guard → Art.No.655
- Carrying bag made of red durable material with carrying strap → Art.No.656
Color | Weight/ g | Norm |
---|---|---|
rot | 370 | ![]() |
weiss | 370 | ![]() |
gelb | 370 | ![]() |
Mindestbestellmenge: 1 Liefereinheit (LE) = 1 Stück
Made in Germany
- They again increase the hold of the protective helmet on the head especially in case of impacts.
- Made of textile strap with quick-release fastener and 4-point suspension (only available for strap interior).
for electrician safety helmet → Art.No.650
Face protection → Art.No.655
Made in Germany
- UK helmet holder universal, especially for flashlights etc.
for electrician safety helmet → Art.No.650
Made in Germany
- Face protection for work up to 1,000 V
- DIN/EN 166 and DIN/EN 170
- GS-ET-29
- Protective screen made of clear polycarbonate, crystal clear
- weight: 195 g
- with helmet holder for attachment to safety helmets, especially the electrician's helmet no. 650
- for protection against electric arcs (class 1)
- protective screen and helmet holder are completely made of plastic
- for grinding, turning and milling work
- especially strong impact load
- high notched impact strength
- as splash protection against chemicals during laboratory work and in the chemical industry
- as splash protection in cleaning plants, bottling plants and die casting plants
- resistant to very low temperatures down to - 50°C in cold stores
- very good transparency
- delivery without helmet → art.no.650
- we recommend for this article the carrying bag → Art.No.656
Class | Weight/ g | Norm |
---|---|---|
1 | 300 | ![]() |
Made in Germany
- Carrying bag made of red durable material with carrying strap
- for work safety helmet and face shield
Color | Weight / g |
---|---|
rot | 500 |
Made in Germany
- Storing bag from red durable material with carrying strap
- for Safe-Clamping Caps and / or other articles
Colour | Ø/mm | height | weight / g |
---|---|---|---|
red | 250 | 360 | 210 |
Safety rubber boots
- a special Dunlop boot for industrial use.
- This boot provides protection against electric shock when working under voltage.
- This protection applies to equipment with voltages up to 1000 volts AC or 1500 volts DC.
- Working on live equipment poses a life-threatening risk.
- To ensure the highest level of safety, the boots are tested in accordance with the above standard before they receive the stamp of approval.
- Robust and durable
- Waterproof
- Toe cap
- SRA non-slip sole
- Oil resistant sole
- Superior chemical resistant
- Protected toe
- Resistant to: Minerals, animal and vegetable oils and fats, various disinfectants and chemicals.
Size | Weight/g | Norm | Norm |
---|---|---|---|
39 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
40 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
41 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
42 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
43 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
44/45 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
46 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
47 | 2.400 | EN ISO 20345:2011.SB.FO.SRA/EN50321 | ![]() |
Duspol VDE GS digital LC
- two-pole voltage tester VDE GS
- tested and approved according to international standard IEC 61243-3 (DIN VDE 0682-401)
- CAT IV 600 V resp. CAT III 1000 V
- Protection class: IP 65 (dust-tight/jet-proof)
- 6 - first code number: protection against access to dangerous parts and protection against
- solid foreign bodies, dust-tight
- 5 - second: code number: protected against splashing water. Can also be used in precipitation.
- Rated voltage range: 1 V to AC 1000 V / DC
- Internal resistance, measuring circuit: PTC 15 kΩ ≥ 360 kΩ.
- Internal resistance, load circuit
- both pushbuttons actuated!: approx. 3.7 kΩ (150 kΩ)
- Current consumption, measuring circuit: max. < 3.5 mA (AC/DC)
- Polarity display: LCD symbol */-
- Voltage display, stepless 6 - 750 V
- Voltage range I: up to approx. 80 V (88.8)
- Voltage range II: from approx. 80 V (888)
- max. display error: ± 2 % of final value Voltage range,
- 20 - 150 Hz sine or DC, ELV Un - 15 %
- Nominal frequency range f: 0 to 150 Hz
- Phase and rotating field direction display:≥ Un 230 V, 50/60 Hz
- Vibration motor, start-up: ≥ Un 230 V
- Test current, continuity test: max. 2 µA
- Test range, contact resistance: 0 - 200 kΩ
- Sound level, acoustic signal: 55 dB
- max. permissible duty cycle: ED = 30 s (max. 30 sec.), 240 s pause
- Device switch-on at measuring voltage: ≥ 6 V
- HOLD function (AC ≤ 250 V, DC ≤ 750 V) activation keystroke ≥ 1.5 s
- Battery: 2 x Micro, LR03/ AAA (3 V)
- Connection cable length: approx. 900 mm
- Operating and storage temperature range: -10 ° C to + 55 ° C (climate category N)
- relative humidity: 20 % to 96 % (climate category N)
- Reset times (thermal protection):
Voltage / Time:
230 V / 30 s
400 V / 9 s
750 V / 2 s
ATTENTION: Voltage tester is not functional when the battery is empty!
Voltage testing without battery is possible from a voltage of ≥ 50 V.
Remove the batteries from the device in case of longer storage!
Weight / g | Norm |
---|---|
300 | ![]() |
Made in Germany
- flexible shaft with neodymium magnet
- high quality full insulation
- for retrieving metal parts from hard to reach areas
- pulling force:1.000 g or 1.800 g
- for working up to 1000 volts
- manufactured according to the latest standard EN 60900:2012 / IEC 60900:2012
Tools with double triangle are tested with a test voltage of 10,000 volts, certified and are suitable for working on live parts up to 1,000 volts.
All safety tools are stamped with the appropriate marks of the standard:
IEC 60900:2012 / EN 60900:2012 or with VDE/GS as well as with article number, dimension,
Year of manufacture, manufacturer, 1000V and double triangle or VDE mark.
The high-quality insulating plastic is compliant with the REACH regulation and withstands the latest PAH test.
Magnetic headØ mm | HandleØ mm | Shaft Ø mm | Traction/ g | mm | g | Norm |
---|---|---|---|---|---|---|
14 | 27 | 7,6 | 1.000 | 470 | 180 | ![]() |
„Made in Germany“
- to hold approx. 65 safety tools and protective parts
- We pay particular attention to your safety in the VDE/PPE area
- good quality of the materials used and high-quality manufacturing of the case
- our largest, made of strong, red smooth cowhide
- all walls extra reinforced
- separate document pocket with extra locks
- extra recesses for additional tools and utensils
- with sturdy carrying strap
- 2 fixed middle walls to hold the plastic case
- Front and back wall can be opened
- 2 tool pockets on the front and back walls
- 2 extra compartments on the middle wall
- Front wall edges are protected by aluminum angles
- other edges are secured by corner reinforcements
- Base shell made of galvanized sheet steel
- other seam ends secured with rivets
- Additional straps for attaching the front and back panels
- lockable locks
- The assembly can be made according to your requirements
Size / mm Outside) | Size / mm (Inside) | weight / g |
---|---|---|
480x250x380 | 460x190x320 | 5.600 |
„ Made in Germany“
- Red Tool Case of Leather
- with 51 Safety Tools and Devices
- also suitable for working on Hybrid-and Electric Vehicles
- According newest Norm EN 60900:2012 / IEC 60900:2012
- The assembly can also be made according to your requirements
Tools with double triangle are tested piece-by-piece with a test Voltage 10.000 Volt and certificated highest possible safeness for working on live parts up to 1.000 Volt.
All Safety Tools are stamped and signed according their Norm:
IEC / EN 60900: 2012 or additional with VDE / GS also with Item Number, Size, Manufacturing Year
and Manufacturer, 1000V and Double Triangle respectively VDE-Sign.
High quality PVC according to the REACH-Regulation and withstand the newest PAK-Inspection.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Made in Germany
- Red tool case, leather, complete with 61 safety tools and guards.
- manufactured according to the latest standard EN 60900:2012/IEC 60900:2012
Tools with double triangle are tested with a test voltage of 10,000 volts, certified and are suitable for working on live parts up to 1,000 volts.
All safety tools are stamped with the appropriate marks of the standard:
IEC 60900:2012 / EN 60900:2012 or with VDE/GS as well as with article number, dimension, Year of manufacture, manufacturer, 1000V and double triangle or VDE mark.
The high-quality insulating plastic is compliant with the REACH regulation and withstands the latest PAH test.